Hey, i have had E2010 running fine for over a year and a half,,not issues at all,,,however when launching the EMC, i do get an error about an old DC that is no longer alive...i did remove it the proper way,,,evidently it didnt go away to nice....not a huge issue, but any ideas on how to find where the EMC is looking for it ???
Thx
We're in an Exchange 2010 hybrid with Office 365, and I have tried in 'slow time' to get an Exch 13 server (VM) up and running to replace it. I know that Exchange upgrades are not to be taken lightly and I wish I'd been given time to work at it. However,
the situation is that I can't configure the EWS virtual directory in the HCW.
I am guessing that the Cumulative Update might be the issue - and I need to install each update in sequence?
Mailflow seems to be working - the only thing I've noted is that my test mailbox goes into junk in my Office 365 account.
Tim
I'm running Exchange 2010 SP2 and unable to assign Mailbox Folder Permissions to a group.
I'm running the following command:
Add-MailboxFolderPermission -Identity User@Domain.com -UserGroup@Domain.com -AccessRights Reviewer
If I use the primary SMTP address the error reads "The user "group@domain" is either not valid SMTP address, or there is no matching information.
If I use domain\group name, the error reads "The user "Group" was found in Active Directory but isn't valid to use for permissions. Try an SMTP address instead."
Anyone have a solution?
DB
What is the Powershell command to pull all the distribution list details from exchange 2010 environment?
It should have primary SMTP address, type of Distribution list, and the members.
Note: There are more than 1000 Distribution lists.
Hello,
I am not sure if this is the right place to ask this question.
I was trying to apply the latest KB4536989 patch to my Exchange 2010 SP3 server which has hub transport, mail server and edge transport in one place.
When I tried to apply it, it came back with the following error.
I reran it again by using "Run as Admin" but the same result.
Does anyone encounter the same error?
Hello,
I have actually an exchange 2010 SP3 ( no rollup update ) install on a Windows 2008 R2 Enterprise server.
I want to update the server with the rollup update 29.
The installation "ended prematurely"
In the event viewer i'v got the following the error code 1603
I've seen the following error on the log :
MSI (c) (C4:58) [16:22:49:703]: Note: 1: 1729MSI (c) (A8:18) [16:28:32:234]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
Action 16:28:32: PrepareDlg. Dialog created
Action ended 16:28:32: PrepareDlg. Return value 1.
CAQuietExec: Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : Le fichier sp‚cifi‚ est introuvable. (Exception
de HRESULT : 0x80070002)
If someone have the same issue or know how to fix that i will be great.
Thank you.
Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
{
Install-AuthCertificate -DomainController $RoleDomainController
}
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.AddAccessRuleCryptographicException: Could not grant Network Service access to the certificate with thumbprint 31596249314B0A6DC7E13E00FAB6765DADA18639
because a cryptographic exception was thrown. ---> System.Security.Cryptography.CryptographicException: Access is denied.
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.CAPIAddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.AddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, String websiteName, Boolean requireSsl, ITopologyConfigurationSession dataSession, Server server,
List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
I get these alerts time to time for various DBs on our DAG nodes. Exchange 2010 SP RU29
In this scenario when I check the DB1 on exchange exc001 it is active and copy is healthy and no relevant errors on exc001 under Microsoft> HA > Operational logs or application logs
Trendmicro AV exclusions are in place. These alerts also show up outside the exchange backup time windows.
I am seeing tons of warnings in system logs on EXC001
Windows successfully diagnosed a low virtual memory condition. The following programs consumed the most virtual memory: TMBMSRV.exe (32204) consumed 67904040960 bytes, store.exe (4256) consumed 58083745792 bytes, and w3wp.exe (9968) consumed 10730725376 bytes.
TMBMSRV.exe (trendmicro security agent running on this server)
Any ideas? Thank you
We have two W2K8 R2 Exchange 2010 SP3 RU11 Multi Role servers with 4 CPU's. One of which has the w3wp MSExchangeECPAppPool process sitting around 50% CPU. This results in the server fluctuating around 70%-100% overall CPU. This is in complete contrast to
the other server which is sits between 27%-50% overall CPU.
Why would the ECPAppPool process hog the CPU? I do not see anything in the event logs to indicate a cause.
The behaviour began around the time we applied May's security and critical updates. Short of removing the updates can anyone suggest a reason for this, or has anyone seen this before?
Kevin Gallagher
Hi All,
I need your help in terms of Exchange - O365 migrations related queries.
Currently we are running on Exchange 2010 SP3 - update 25 (ABC.COM) with On Premise AD and we have another org in office 365 E-3 environment with 500 users as (XYZ.COM) as seperate entity with Azure AD.
Now, we would like to centralize mail flow from our Exchange 2010 on prem. environment where each policy / emails should come on prem first and then it should flow further.
I just wanted to know how we can take this ahead in terms of AD/ Exchange Migration and what would be the first step for the same
Thanks in Advance
Hello All,
I have unmounted and removed an Exchange database from our Exchange 2010 organization. I also removed the edb file as noted in the pop-up massage.
There are a few log files that have a date-time stamp that is before the time I unmounted the database. There is also a folder named CatalogData followed by a long alphanumeric string.
Can these files or folders be deleted as well? They don't consume hardly any disk space so there isn't a real benefit to removing them. However, I would like to clean things up as much as possible.
Thanks for any thought on this.
Hi,
My client is running SBS 2011 (window server 2008 R2 with exchange 2010).
I just renew self-signed certificate using sbs console->fix my network->renew certificate.
The certificate is renew successfully.
Below is the screenshot from sbs console certificate property
below is the screenshot from exchange console when I click on exchange server (Microsoft Exchange On-Premises->server configuration)
II can see that the new certificate is active and assigned to IMAP, POP, IIS, SMTP, but my question is on the self signed column it say False, how do I change it to true?, since it causing problem with client validating the certificate and create SSL/TLS issue with outlook.
I appreciated if you could shed some light on how to fix this issue, previously I did the same thing if you see the certificate that just expire on 13/03/2020, the self signed column it say true, not sure why this time it say false.
NB: I could not find the category for exchange 2010 so I click on 2013
Thank you
Regards
- Haris -
Hi,
I am running an on-premise Exchange Server 2016 CU12 with all current updates as of 3/18/2020. Is our Exchange Server vulnerable to the remote code execution vulnerability known as CVE-2020-0688? I know there are patches for CU13 -CU15 but nothing for CU12.
Thanks,
Bob
Bob Andres
Hi All,
I am racking my brains trying to get this to work so far i have
Get-AzureADGroupMember -ObjectId | select membersBut it just seems to sit there. any help would be appreciated.
Cheers,
I've been charged with migrating to exchange 2016.
I've also been charged with securing the existing exchange 2010 platform that exists.
There's 2 front end HUB/CAS servers and 3 backend mailbox servers.
all 2008 r2 with latest updates and cu30.
One of the main lacking security items on this legacy platform is ciphers, ssl/tls versions are way behind and i am not sure the best way to do this to not break client access and cause a problem with exchange itself.
I've found that IIS Crypto tool is an easy way to comply with the latest ciphers and tls/ssl settings.
Is this true? Any issues with 2008 r2/exchange 2010 that I should be aware of?
I'm going to test this in a lab, but that isnt exactly a mirror image of our production env.
<style><br _moz_dirty="" /></style>
guys
Is lotus domino to exchange 2010 migration is possible with any other tools ?
if yes let me know and also post the download link to test the tool in my LAB
We are planning on migrating to Office 365 this year however we still have a pair of clustered Exchange 2010 SP3 RU30 servers to support. In the interim we are also updating our domain controllers. Most of them are Windows 2008 R2 with one Windows 2016 and the domain function level is Windows 2009 R2.
I have looked for what the serviceable level of domain controllers E2010 SP3 RU30 can run with and there's a bit of confusion. One place says max is 2012 R2, on says 2016. One even says 2019 but it's unclear.
Presently I am installing Windows 2019 domain controllers and I would at least like to raise the domain function level to Windows 2012 R2 for the near future, 2016 function level by the end of the summer and perhaps when we will have our migration to 365 going.
Is this a viable option or am I stuck with Server 2016 with AD at 2012 R2?
Exchange 2010 SP3 RU30, DAG
I have restored a recovery database to one of the servers in the DAG however I am having trouble moving mail from the recovery DB into the user's mailbox that needs the email recovered. I have two questions:
First is that I'm getting the following error every time I run this command:
Confirm
Are you sure you want to perform this action?
Recovering mailbox content from mailbox 'USER' in the recovery database 'RecoDB3' to the mailbox for 'USER (USER@DOMAIN.com)'. This operation may take a long time to complete.
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): A
Error was found for USER (USER@DOMAIN.com) because: Error occurred in the step: Moving messages. Fa
iled to copy messages to the destination mailbox store with error:
MAPI or an unspecified service provider.
ID no: 00000000-0000-00000000, error code: -1056749164
+ CategoryInfo : InvalidOperation: (0:Int32) [Restore-Mailbox], RecipientTaskException
+ FullyQualifiedErrorId : 3DF847B,Microsoft.Exchange.Management.RecipientTasks.RestoreMailbox
Note that EMC appears to be moving mail and gets to about half way complete before spitting out the error message.
Despite that the error code seems to be that the DB isn't or can't be mounted the Exchange system shows otherwise. Running:
And I can unmount and remount that recovery DB all day long with no errors.
Is there a way around this?
Also if I can't simply move the data into his mailbox can I export from the RecoveryDB into a PST?